• Automatic Corrugated Cardboard sheet Feeder feeding die-cutting and creasing machine
  • Automatic Corrugated Cardboard sheet Feeder feeding die-cutting and creasing machine
  • Automatic Corrugated Cardboard sheet Feeder feeding die-cutting and creasing machine
  • Automatic Corrugated Cardboard sheet Feeder feeding die-cutting and creasing machine
  • Automatic Corrugated Cardboard sheet Feeder feeding die-cutting and creasing machine

Automatic Corrugated Cardboard sheet Feeder feeding die-cutting and creasing machine

Share

Model

HD3-1500

Die cutting type

Pressed flat die cutting(Lower side is movable while upper side is unmovable)

Max paper transmitting size 

1510*1120mm

Min paper transmitting size

450*500mm

Max die cutting size

1490*1100mm

Min gripper size

8mm

Max die cutting pressure

400N/cm²

Paper processed

Ivory board

0.1-0.3mm

Corrugated board

Less than 8mm

Die cutting precision

±0.1mm

Max die cutting speed

4600sheets/h

Max feeding pile height

1400mm(above the level)

Min feeding pile height

1250mm(above the level)

Total power

18kw

Total weight

19.5T

Overall size

6870*2398*2356mm

(Not including the pedal)  

Machine Introduction:

1. The extra feeder can do paper and corrugated board. Install the vacuum pump of BECKER.

2. At the middle of head install the monitor ,worker can easily see the back

3. Pre-paper pile design and special pneumatic bench can save much time

4. The non-stop sampling system can check the board accurate without stop the machine

image.png

image.png

Feeding and Collecting Part:

1.Additional brush wheels and pressing wheels for thin paper and corrugated board running.

2. Advance push and pull lay of registration can assure the die cutting precision

3. Rikko light front lay detection system prevent the slanting paper move in main body.

image.png

Main body:

1.Adopt automatic centralized lubricating system and setting main chain lubricating system by HMI

2.Patented design shock absorption system can prolong the life of main body and increase the pressure

3.The intermittent gearbox made in Taiwan can assure the accurate registration and decrease the gripper attack.

image.png

Die-cutting part and Delivery system:

1. Die-cutting chase fixed accurately by pneumatic lock system

2. Die-cutting plate is putted in and out by air floating device

3. Electric clutch system of main chain can assure the chain steady when it is stopped at high speed

4. Main chain and assist chain is lubricated periodically controlled by PLC

5. Protection window of die-cutting can hold the main body clean

image.png

Packaging & Delivery
Packaging Details:
We usually packed this machine covered by plastic film. 
Delivery Detail:
Within 30 days after we got the deposit.





PRODUCT CATEGORY
  • Shandong Rino International Trade Co., LTD.
  • Add.: Shandongjinan High Tech Zone Hisense Chuangzhi Valley Room 1-2003 http://www.rinointltrade.com/ https://rinointltrade.en.alibaba.com/
  • Tel: +86 531 8887 0750
  • Mob.: +86 139 5418 5696 , +86 130 0174 3399
  • Fax: +86 531 8887 0750
*
*
*
*
Ellen Lin
Afei liu
Gao
Whatsapp
WeChat
Tina