Electric Mill Roll Stand for corrugated board production

Electric Mill Roll Stand

introduce

1.Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.

2.each shaftless mill roll stand is equipped with two pieces of paper guide, two set    of    paper car;paper guide the use of channel 14 and the guide post weld,paper    

    car    adopt    10mm welded stell,the length of track is 6000mm.

3.manual dics brake,add screw following.

4.electric elements centralized control the electric elements,toothed chuck.

technical parameters

1,the range of paper jams:maximum:1800mm    minimum:600mm

2,the diameter of paper jams:maximum:1400mm    minimum:400mm

3,Unilateral maximum load:maximum2000Kg

4,Powered motor parameters:

Paper jams motor550W×4set  380V    50HZ short(S2)working standard

lift motor 1.5KW      380V    50HZ  short(S2)working standard

Mainly purchased parts, raw materials and origin

Finished product 

Packaging & Shipping