How Should The Creasing Machine Be Safely Operated?

Dec. 05, 2018

Creasing Machine safety procedures:

1. The operator must perform no-load inspection of the equipment and safety devices before the die-cutting and creasing machine is operated. Production can be carried out after the performance of each part is normal.

2. When the protective device and other major components in operation are in an abnormal situation that endangers personal safety, the parking should be reported to the leader. No one is allowed to produce until the fault is not ruled out.

3. It is strictly forbidden to grab and grab when you operate. Do not refill or take paper from both sides of the device.

4. It is strictly forbidden to place items on the die-cutting and creasing machine.

5. When working outside the indentation on the die-cutting and creasing machine, the total power of the unit must be cut off. Wait until all moving parts have stopped moving.

6. The travel switch of the safety guard should not be used as a normal parking switch.

7. Personnel performing repair, maintenance and inspection of the die-cutting and creasing machine should be familiar with the equipment and this standard and comply with the requirements of this standard.

We are the manufacturer of packaging equipment. If you want to know more about our packaging equipment, please contact us and we can provide you with Corrugated cardboard Machine. Please contact us.

Manual die-cutting and creasing machine


  • Shandong Rino International Group
  • Add.: Shandongjinan High Tech Zone Hisense Chuangzhi Valley Room 1-2003 http://www.rinointltrade.com/ https://rinointltrade.en.alibaba.com/
  • Tel: +86 531 8887 0750
  • Mob.: +86 139 5418 5696 , +86 130 0174 3399
  • Fax: +86 531 8887 0750
*
*
*
*
Ellen Lin
Afei liu
Gao
Whatsapp
WeChat
Tina